Which seed drill should I buy?

The drill you buy will depend on the type of tillage system that youprefer, and the soil type and conditions, amongst other factors that can change with the weather! Take advantage of expert knowledge by discussing your needs with our experts and we’re sure to source a great machine for you. <a href="/contact-us" title="" target="">Contact us</a> today!

What are the benefits of direct drilling?

Direct drilling is very attractive to most farmers as it removes the need for multiple cultivation passes to create a seedbed. The main <a href="/blog/8-benefits-of-using-a-direct-drill-for-seed-cultivation" title="" target="">benefits of direct drilling </a> are cost reduction due to the reduced groundwork and soil heath as there is less traffic and soil disturbance helping the soil to work organically as nature intended. Unfortunately, it doesn’t work for everyone; in some situations, the soil or conditions mean that more cultivation is needed to increase the germination of the crop.

Which cultivator should I buy?

Choose based on your soil type, residue levels, working window, and tractor power. A good starting point is AMTEC’s <a href="https://amtec-group.com/blog/what-does-a-cultivator-do-choosing-the-right-equipment-for-your-soil-type" title="" target="">tine vs disc guidance</a> for different soil types: tines often suit lighter soils and deeper loosening, while discs can perform well in heavier clay and higher residue, working efficiently in the top layer. If you want a structured “what to buy and what to check” framework, use the <a href="https://amtec-group.com/about/buyers-guides/buyers-guide-for-farmers-used-cultivators" title="" target="">used cultivator buying guide</a>.

Ploughing completely inverts the soil, burying weeds and crop residues that shallow cultivators may leave near the surface. Used periodically, it can reduce persistent weeds such as blackgrass, reset surface compaction, and create a clean seedbed. Many farms alternate ploughing with low-disturbance systems to balance soil health and timeliness. For setup fundamentals, <a href="https://amtec-group.com/blog/basic-plough-settings" title="" target="">see our plough setup guides</a>.

How do I store my drill?

To extend the life of your drill and to reduce damage how you store your drill after use is very important. There are 3 main actions to carry out:<ol><li>Ensure the drill is thoroughly cleaned out, and all the seed (and fertiliser if it is a grain and fert drill) is removed, leaving seed in the hopper can not only damage the drill but also encourages rodent activity which can cause a lot of expensive damage to the metering system and the electrics.</li><li>The drill should be cleaned and oiled/greased this will help keep any water out of the bearings and moving parts which will prevent them from being seized next time you come to use it.</li><li>Keep the control box in a warm, dry place. The control box is one of the most important parts of the drill but is also one of the most delicate. Ensuring that it doesn’t get damp and is kept at a constant temperature means it’ll be working again next year.</li></ol><ol style="list-style-type: lower-roman;"></ol>

What is the best drill for wet weather?

Weather can be a real problem when drilling, particularly when the conditions are too wet. There is no definitive solution or perfect machine, but the <a class="tinymce" href="/farm-agricultural-machinery/drills">best types of drill</a> for these challenging conditions are mounted machines like a tine seeder or <a class="tinymce" href="/farm-agricultural-machinery/power-harrows">power harrow</a>/drill combination. The tine seeder is effective due to the lightweight and open frame helping to cope with high trash and damp soil and also preventing it from sinking.

Are Massey Ferguson tractors any good?

Massey Ferguson <a class="tinymce" href="/farm-agricultural-machinery/tractors-and-vehicles">tractors</a> are generally regarded as excellent tractors. They are robust and reliable and have even served the US military in the past.

Are Massey Ferguson tractors made in the UK?

Massey Ferguson tractors are manufactured in multiple locations worldwide. The company was established in the 1950s via a merger between two agricultural manufacturing companies: Massey-Harris of Canada and the Ferguson company, based in the UK.

Where are Massey Ferguson tractors from?

Massey Ferguson was first created in the 1950s via a merger between two agricultural manufacturing companies: Massey-Harris of Canada and the Ferguson company, based in the UK. Massey Ferguson tractors are now manufactured by AGCO, and are built all over the world.

Who makes the Massey Ferguson tractor?

The Massey Ferguson <a class="tinymce" href="/farm-agricultural-machinery/tractors-and-vehicles">tractor</a> is made by the AGCO corporation, a global manufacturer and distributor of agricultural machinery and equipment.

Who makes the engine for the Massey Ferguson tractors?

Massey Ferguson tractors are fitted with Iseki engines. Iseki engines are available either as <a class="tinymce" href="/farm-agricultural-machinery/tractors-and-vehicles">tractor-only</a>, tractor-loader-backhoe, or tractor with loader.

Does Ford still make a tractor?

Ford no longer makes <a class="tinymce" href="/farm-agricultural-machinery/tractors-and-vehicles">tractors</a>. In 1991, Ford sold its tractor division to Italian company Fiat. Fiat has since renamed Ford-identified tractors to “New Holland” tractors.

Is Ford and New Holland the same tractor?

After Ford sold its tractor division to Fiat in 1991, the tractors were renamed by Fiat as “New Holland” <a class="tinymce" href="/farm-agricultural-machinery/tractors-and-vehicles">tractors</a>.

Is a New Holland tractor a Ford?

New Holland is the name given to tractors manufactured by Fiat after Ford sold its tractor division to the Italian brand in 1991.

Is New Holland and John Deere the same?

No, New Holland and John Deere are different makes of tractors and agricultural machinery.

When did Ford stop making tractor?

Ford sold its farm equipment and tractor division to Fiat in 1991.

What is the difference between a forklift and a telehandler?

The forks on a forklift can only lift loads up and down. Telehandlers, on the other hand, have booms which can be fitted with different attachments, and can lift loads forwards, backwards and side to side. Telehandlers can also move loads without moving their base, whereas forklifts must be driven forwards and backwards to move loads.

How high can a telehandler lift?

Telehandlers come in a variety of different specifications, each with different maximum lift heights. Typically, the maximum lift height will range between 4 meters and 20 meters.

What is another name for a telehandler?

A telehandler can also be referred to as a cherry picker, a reach fork truck, a lull, a teleporter or a telescopic forklift.

Is a loadall a telehandler?

The JCB Loadall is a type of telehandler.

What licence do I need to drive a John Deere Gator?

If the Gator’s ULW (unladen weight) is under 550 kgs, you’ll need either a category B1 licence, or a full category B car licence.

How much can a JCB telehandler?

The maximum lift weight of a JCB telehandler will depend on the model. The JCB 540-200 Telehandler, for example, has a maximum lift capacity of 4000 kg.

Who makes JCB telehandler?

The JCB telehandler is made by JCB, a British construction, demolition and agricultural machinery manufacturer.

What is the largest JCB telehandler?

The JCB 560-80 Agri has the highest maximum lift capacity of any JCB loadall at 6000 kg.

What HP is a Fendt 716?

The Fendt 716 tractor has 167 HP.

What HP is a Fendt 724?

The Fendt 724 tractor has 242 HP.

How much does an anaerobic digester cost?

Anaerobic digestion systems can be expensive investments, costing anywhere from £750,000 to well over £1m on average.

What does an anaerobic digester do?

An anaerobic digestor uses the process of fermentation to break down organic matter and waste from animals, plants or sewage to produce biogas. The biogas can then be used as an energy source.

Why are anaerobic digesters bad?

Anaerobic digesters are oxygen-free environments, meaning they release methane, carbon dioxide and other gases into the environment, which can be fatal to both animals and humans.

How does fence post driver work?

A fence post driver, or post pounder, is used to drive fence posts into land surfaces. The open end of the post driver is put over the top of the post, and the tool is then lifted and dropped repeatedly onto the top of the post, with the closed end striking and driving the post into the ground.

What does a post driver do?

A post driver, post rammer, post pounder, post knocker or fence driver is a tool used to drive fence posts into land surfaces.

Are hand spreaders any good?

Hand spreaders are a convenient tool for putting down product quickly, easily and uniformly on smaller areas of grassland or lawn. For larger areas of farmland, a farm sprayer or spreader would be a more appropriate tool for applying fertiliser or nutrients to fields.

Can you put fertilizer in a spreader?

Yes, fertilizer can be put in a spreader for even, uniform application to a lawn or field.

Do I need a spreader for fertilizer?

Spreading fertilizer over a lawn or field should be done with a spreader, as it ensures the nutrients are spread over the ground efficiently and uniformly.

What is a combi seed drill?

A combi or <a class="tinymce" href="/farm-agricultural-machinery/drills">combination seed drill</a> is an agricultural machine that allows for efficient seed planting. A combination drill combines ploughing and sowing into one, using tine or disc cultivators to turn and produce a stale seedbed before sowing the seeds.

Where are Väderstad drills made?

Väderstad is a Swedish company, and most of their products (including <a class="tinymce" href="/farm-agricultural-machinery/drills">seed drills</a>) are manufactured in Väderstad, Sweden, the town after which the company is named. All <a class="tinymce" href="/brands/vaderstad">Väderstad Farm Machinery</a> is manufactured at their factory in Langbank, Saskatchewan, in Canada.

Where is Seed Hawk made?

Väderstad’s Seed Hawk line is manufactured in the company’s factory in Langbank, Saskatchewan, in Canada.

Who makes Fendt tractors?

Fendt is a German agricultural machinery manufacturer, which was purchased by AGCO Corporation in 1997.

Can a JCB Fastrac go on the motorway?

<span class="tinymce" style="font-size: 11.0pt; line-height: 107%; font-family: 'Calibri',sans-serif; mso-ascii-theme-font: minor-latin; mso-fareast-font-family: Calibri; mso-fareast-theme-font: minor-latin; mso-hansi-theme-font: minor-latin; mso-bidi-font-family: 'Times New Roman'; mso-bidi-theme-font: minor-bidi; mso-ansi-language: EN-GB; mso-fareast-language: EN-US; mso-bidi-language: AR-SA;">Yes – the JCB Fastrac can be driven on the motorway at a maximum speed of 40 mph.

How fast does a JCB Fastrac go?

Depending on the model, a JCB Fastrac will have a maximum speed of between 40 mph and 47 mph.

What is a JCB Fastrac used for?

The JCB Fastrac is a high-speed agricultural tractor, and can be used for field work, livestock and haulage operations.

Is Valtra and Valmet the same?

Valtra and Valmet are the same brand – the company was initially named Valmet, before changing its name to ValtraValmet in 1998 and finally to Valtra in 2001.

Is a Manitou a telehandler?

Manitou is a brand which manufactures telehandlers.

What is the smallest Manitou telehandler?

The smallest Manitou telehandler is the MT 420 H super-compact telehandler. It is extremely narrow, which allows for increased manoeuvrability.

Who makes the Manitou telehandler?

The Manitou telehandler is made by Manitou Group, a company comprised of two brands: Gehl and Mustang.

Do Case still make tractors?

Case IH still make tractors, offering a variety of ‘families’ or models, including the Steiger, Puma, Magnum, Maxxum and Farmall.

Who makes the engines for Case tractors?

The Case <a class="tinymce" href="/farm-agricultural-machinery/tractors-and-vehicles">tractor engines</a> are designed by Fiat’s Powertrain technologies, a sister company of Case IH.

Home > FAQs > Farming Machinery > Ploughs > What is a Furrow?

What is a Furrow?

Q: Which plough should I buy?

Start with your conditions, then match features to suit.Quick guide:<ul><li>Stone content: choose auto-reset legs for stony ground to reduce stoppages; shear-bolt protection suits lighter, cleaner land. </li><li>Soil type and residue: pick the mouldboard shape that will invert and bury trash cleanly in your soil. </li><li>Tractor power and width: number of bodies and working width must match the available horsepower. As a rough rule, allow about 20–30 hp per furrow on 14–16" bodies. </li><li>Ease of use: hydraulic vari-width and hydraulic front-furrow make in-field adjustments quicker.Browse our <a href="/brands/lemken/plough" title="" target="">Lemken ploughs</a> and <a href="/brands/kverneland/plough" title="" target="">Kverneland ploughs</a>, or read the <a href="https://amtec-group.com/about/buyers-guides/buyers-guide-for-farmers-used-ploughs" title="" target="">Used Plough Buyer’s Guide</a> for a deeper checklist.</li></ul>

A furrow is the long, narrow trench created as the body turns the furrow slice. The adjacent ridge of turned soil is the crown. A good setup gives uniform furrows with minimal open joints.